BVL 2T Vacuum Glass Lifter – 2000kg Heavy-Duty Glass Lifting Machine

Lifting, moving, rotating, tilting, and installing large glass panels by hand is slow, risky, and impractical on modern construction sites. A 2000kg vacuum glass lifter gives facade contractors, glazing companies, and curtain wall installers a controlled, mechanical way to handle oversized glass from lift to final positioning.

The BVL 2T is a 2-ton capacity vacuum lifting machine built for demanding glass installation work. It combines a 3,512 mm boom extension, 360° electric rotation, automatic balance, electric tilt, wireless remote control, and a battery-powered system — all in one unit.

Technical Specifications

The BVL 2T is rated for a maximum load of 2,000 kg, with a maximum boom extension of 3,512 mm. It offers electric rotation from 0 to 360 degrees, electric tilt up to +40° upward and −30° downward, and side adjustment up to ±15° in both directions.

The machine runs on a DC24V working system powered by two DC12V 100Ah batteries, with a specified operating time of up to 8 hours per charge. The charger accepts AC 220V or 110V–240V input, and the unit uses a 3 kW motor.

Operation is handled through a wireless remote control, while vacuum conditions are monitored by sensors, a pressure gauge, and an alarm buzzer. The BVL 2T carries an IP43 protection rating and weighs approximately 2,600 kg.

Note on load: maximum rated load depends on working configuration and boom extension. Always check the applicable load curve at each working position before lifting.

Key Features

2000kg Capacity for Heavy Glass Handling

The 2-ton lifting capacity makes the BVL 2T suitable for large insulated glass units (IGU), architectural glass panels, curtain wall elements, and oversized glazing components where smaller suction lifters or manual handling fall short. For professional glass lifting equipment, capacity is only part of the selection — working reach matters just as much, since allowable load changes as the boom extends.

3,512 mm Boom Extension

Large panels are often installed beyond the building edge or over support structures. The 3,512 mm boom gives operators greater reach for facade glass installation equipment in hard-to-access positions. The boom adjusts to the application, but rated capacity must be verified at each extension position.

Automatic Balance for Precise Positioning

Keeping a large panel stable during final alignment is challenging. The BVL 2T's automatic balance system holds a steadier lift and reduces dependence on manual adjustment — especially useful for repeated lifts where consistent positioning improves cycle time.

360° Electric Rotation

Glass installation rarely needs vertical lifting alone. With 0–360° electric rotation, the operator can reorient the panel after lifting to match the final installation direction — ideal for curtain wall glass lifter and architectural glazing work, cutting unnecessary manual handling.

Electric Tilt & Side Adjustment

Electric tilt reaches +40° upward and −30° downward, with side adjustment up to ±15° in both directions. These functions let the operator align the glass accurately into a frame or curtain wall system.

Wireless Remote Control

A wireless remote lets the operator control lifting, rotation, tilting, and positioning from the best vantage point — a clear view of both the panel and the installation area improves safety and precision.

24V Battery-Powered System

The DC24V system runs on two DC12V 100Ah batteries with up to 8 hours of operation, and the charger accepts AC 220V or 110V–240V. Battery power removes the need to run power cables across the site. Inspect battery and electrical condition per the manual before use.

Vacuum Safety Monitoring

Vacuum lifting depends on stable suction between pads and glass. The BVL 2T includes sensors, a pressure gauge, and an alarm buzzer for live monitoring. Before each lift, inspect suction pads, hoses, seals, and the glass surface — the glass must offer a suitable surface for vacuum lifting.

IP43 Protection

Rated IP43, the machine offers defined protection against dust and moisture common on outdoor sites. Always assess site conditions and follow the manufacturer's storage, maintenance, and operating requirements.

Applications

The BVL 2T is a versatile glass lifting machine for professional work, including:

• Large architectural glass installation
• Facade glass installation
• Curtain wall construction
• Large window installation
• Heavy glass panel handling

For facade contractors, the long boom and electric positioning move panels into hard-to-reach areas. For glazing companies, the 2-ton vacuum lifter handles large, heavy glass units. And for teams doing repeated lifts, the BVL 2T keeps lifting, rotation, tilt, and positioning consistent job after job.

How to Choose a Vacuum Glass Lifter

Selecting glass handling equipment takes more than comparing maximum capacity:

1. Calculate the heaviest panel weight.
2. Check the required working reach and its corresponding load curve.
3. Confirm the suction system suits the glass surface.
4. Define movement needs — lifting only, or also rotation, tilt, and side adjustment.
5. Assess site conditions: access, installation height, outdoor use, and working space.

Matching the machine to the full application is the fastest route to safer, more efficient glass handling.

FAQ

What is the maximum load of the BVL 2T? The BVL 2T has a maximum rated load of 2,000 kg (2 tons). Actual capacity depends on boom extension and working configuration, so always follow the load curve.

What is the boom reach? Maximum boom extension is 3,512 mm.

Does the BVL 2T rotate 360 degrees? Yes, electric rotation covers 0–360°.

What power does it use? It runs on a DC24V system with two DC12V 100Ah batteries (up to 8 hours per charge) and charges from AC 220V or 110V–240V.

Is the BVL 2T remote controlled? Yes, it is operated via wireless remote control.

What glass can it lift? Architectural glass, facade glass, curtain wall panels, insulated glass units (IGU), and other heavy glass elements with a suitable vacuum surface.

Conclusion

The BVL 2T combines 2,000 kg capacity, a 3,512 mm boom, automatic balance, 360° rotation, electric tilt and side adjustment, battery power, vacuum monitoring, and wireless remote control — a complete heavy-duty vacuum glass lifter for large architectural glass and facade installation projects.

For facade contractors, glazing companies, curtain wall installers, and professional glass teams, the BVL 2T is a practical, repeatable solution for lifting and positioning large glass panels. Choose glass lifting equipment by weighing panel weight, dimensions, surface, center of gravity, reach, installation environment, and the applicable load curve.